우리의 Oracle Risk Management Cloud 2023 Implementation Professional 시험 덤프 문제는 최고품질의 시험대비 자료입니다. 전문가들이 최신 실러버스에 따라 몇년간의 노하우와 경험을 충분히 활용하여 연구제작해낸 자료라 해당 시험의 핵심문제를 모두 반영하고 있습니다.1z0-1058-23 덤프로 시험을 준비하시면 시험패스는 더는 어려운 일이 아닙니다. 1z0-1058-23 시험에서 출제 가능성이 높은 문제만 정리한 최신 버전 자료라 가장 적은 문항수로 모든 응시자가 효율적인 시험공부를 할 수 있도록 하고 부담 없이 한번에 1z0-1058-23 시험을 즉시 통과할 수 있도록 도와드립니다.
간결한 내용
1z0-1058-23 덤프문제는 다년간의 다양한 시험에 대한 분석을 바탕으로, 시험문제의 주요 발전 경향에 따라 응시자가 직면할 어려움을 정면 돌파하기 위하여 전문가들이 자신만의 경험과 끊임없는 노력으로 제작한 최고품질의 시험자료입니다.다른 교육 플랫폼과 달리 Oracle Risk Management Cloud 2023 Implementation Professional 시험덤프는 오래된 문제는 삭제하고 새로운 문제는 바로바로 추가하여 덤프가 항상 가장 최신버전이도록 간결하고 눈에 잘 띄는 텍스트로 요약되어 있기에 덤프만 완벽하게 마스터 하시면 1z0-1058-23 시험패스는 더는 어려운 일이 아닙니다.
진정한 시뮬레이션 환경
많은 응시자 분들이 처음 자격증 시험에 도전하는 것이라 시험보실 때 경험 부족으로 인해 시험시간에 너무 긴장하여 평소 실력을 발휘하지 못하는 경우가 있습니다.이를 피면할수 있도록 미리 Oracle Risk Management Cloud 2023 Implementation Professional 시험과 비슷한 환경에서 연습하는 훈련을 통해 실제 시험에서 긴장을 완화시키는 것이 좋습니다. 저희는1z0-1058-23 실제 시험 시뮬레이션 테스트 환경에 해당하는 제품을 가지고 있습니다. 제품 구매후 자신의 계정에 로그인하시고 실제 시험 환경을 체험해 보시면 시험 환경에 적응되어 1z0-1058-23 시험보실때 문제 푸는 방법을 모색하는 시간이 줄어들어 자신감이 생겨 한방에 시험패스 가능할것입니다.
커리큘럼 소개
대부분의 분들에게 있어서 자격증 시험이 처음일 수 있으므로 자격증 시험과 관련된 많은 정보는 복잡하고 난해할수 있습니다. 하지만 자격증 취득 초보자들의 덤프공부 후기에 따르면 1z0-1058-23 덤프는 시험의 모든 출제범위와 시험유형을 커버하고 있어 덤프에 있는 문제와 답만 기억하시면 Oracle Risk Management Cloud 2023 Implementation Professional 시험을 쉽게 패스하여 자격증을 취득할수 있다고 합니다. 1z0-1058-23 시험대비 덤프는 초보자의 눈높이에 맞추어 덤프를 사용하시는 분께서 보다 편하게 공부할수 있도록 엘리트한 전문가들의 끊임없는 연구와 자신만의 노하우로 최선을 다한 자료입니다.덤프의 도움으로 여러분은 업계에서 또 한층 업그레이드 될것입니다.
최신 Oracle Risk Management Cloud 1z0-1058-23 무료샘플문제:
1. Which two activities can be performed using Financial Reporting Compliance? (Choose two.)
A) Review control assessment results, along with any effectiveness issues found.
B) Provide self-service access to reporting and analysis against financial transactions.
C) Conduct intuitive audits of general ledger balances with journal details.
D) Continuously monitor financial transactions and role-based remediation of transaction incidents.
E) Gain real-time access to live financial data and proactively resolve issues.
F) Review and approve the accuracy and completeness of control descriptions.
2. You are advising your client on design and configuration related to how access incident results will be viewed and managed. The client has provided a list of business requirements:
* Incident results can be viewed by Department
* Groups of investigators receive assigned incidents based on Department
* Must ensure systematically that no incident is unassigned to an investigator Which three must be configured to support these requirements? (Choose three.)
A) Investigators are assigned job roles with custom Department perspective data roles attached. Other incident users receive job roles which only allow viewing of incidents.
B) Worklist assignment Result Investigator should be set to "All Eligible Users"
C) Custom perspective for Department linked to the Results object with Required set to "No"
D) Worklist assignment Result Investigator should be set to specific users.
E) Investigators are assigned job roles with custom Department perspective data roles attached for managing incidents. Other incident users are assigned job roles with custom Department perspective data roles attached for viewing only.
F) Custom perspective for Department linked to the Results object with Required set to "Yes"
3. When you view or edit a transaction incident, you may see extra columns that are not present in the business objects used in the control.
What three kinds of control logic or conditions can cause this? (Choose three.)
A) Equals (when the same attribute is used on both sides of the condition)
B) Average Function
C) Similar
D) Not in
E) Between (when using a date attribute)
4. You are helping your client identify and define their controls. You have determined that your client requires two perspectives: Business Units and Regulatory Standards.
The controls are going to be secured by the business unit, and you want to ensure that when the client defines new controls, it is mandatory to assign a Business Units perspective to the control. You are going to set the
"Required" field to "yes" for the Control-Business Units association.
Where do you do this in the product?
A) The Manage Object Perspectives screen
B) The Create Control screen
C) The Manage Module Perspectives screen
D) The Import template
E) The Create Perspectives screen
5. Your customer needs to conduct monthly Operational Effectiveness assessments for controls across two organizations (North America and EMEA). Your customer requires that assessment results for North America be accessible only to users in North America and likewise for EMEA. Additionally, the Chief Risk Officer reviews the assessment results by Business Process every week.
How should you design perspectives to achieve this?
A) Use the Region hierarchy for security and the Business Process hierarchy for reporting of controls.
B) Use both Region and Business Process hierarchies solely for reporting purposes.
C) Use the Business Process hierarchy for security and the Region hierarchy for reporting of controls.
D) Use the Region hierarchy initially, and later use both Region and Business Process hierarchies for security.
질문과 대답:
질문 # 1 정답: D,F | 질문 # 2 정답: A,B,D | 질문 # 3 정답: C,D,E | 질문 # 4 정답: A | 질문 # 5 정답: A |