시험대비자료는 덤프가 최고

처음으로 자격증에 도전하시는 분들이 많을것이라 믿습니다.우선 시험센터나 인증사 사이트에서 고객님께서 취득하려는 자격증이 어느 시험을 보셔야 취득이 가능한지 확인하셔야 합니다.그리고 시험시간,출제범위,시험문항수와 같은 TS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010시험정보에 대해 잘 체크하신후 그 시험코드와 동일한 코드로 되어있는 덤프를 구매하셔서 시험공부를 하시면 됩니다.70-595덤프구매전 사이트에서 일부분 문제를 다운받아 덤프유효성을 확인하셔도 좋습니다.저희 사이트의 영원히 변치않는 취지는 될수있는 한 해드릴수 있는데까지 70-595시험 응시자 분들께 편리를 가져다 드리는것입니다. 응시자 여러분들이 시험을 우수한 성적으로 합격할수 있도록 적중율 높은 덤프를 제공해드릴것을 약속드립니다.

자격증의 필요성

IT업계에 종사하시는 분께 있어서 국제인증 자격증이 없다는 것은 좀 심각한 일이 아닌가 싶습니다. 그만큼 자격증이 취직이거나 연봉협상, 승진, 이직 등에 큰 영향을 끼치고 있습니다. 70-595시험을 패스하여 자격증을 취득하시면 고객님께 많은 이로운 점을 가져다 드릴수 있습니다. 이렇게 중요한 시험인만큼 고객님께서도 시험에 관해 검색하다 저희 사이트까지 찾아오게 되었을것입니다. 70-595덤프를 공부하여 시험을 보는것은 고객님의 가장 현명한 선택이 될것입니다.덤프에 있는 문제를 마스터하시면 TS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010시험에서 합격할수 있습니다.구매전이거나 구매후 문제가 있으시면 온라인서비스나 메일상담으로 의문점을 보내주세요. 친절한 한국어 서비스로 고객님의 문의점을 풀어드립니다.

IT 업계의 선두자로서 저희의 목표는 IT인증시험에 참가하는 모든 분들께 도움을 제공해드리는 것입니다. 이 목표를 달성하기 위해 저희의 전문가들은 시간이 지날수록 쌓이는 경험과 노하우로 IT자격증시험 응시자분들을 지원하고 있습니다.덤프제작팀의 엘리트들은 최선을 다하여 근년래 출제된 TS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010 시험문제의 출제경향을 분석하고 정리하여 가장 적중율 높은 70-595시험대비 자료를 제작하였습니다.이와 같은 피타는 노력으로 만들어진 70-595 덤프는 이미 많은 분들을 도와 70-595시험을 패스하여 자격증을 손에 넣게 해드립니다.

데모문제 다운로드

덤프유효기간을 최대한 연장

70-595덤프를 구매하시면 1년무료 업데이트 서비스를 제공해드립니다.덤프제작팀은 거의 매일 모든 덤프가 업데이트 가능한지 체크하고 있는데 업데이트되면 고객님께서 덤프구매시 사용한 메일주소에 따끈따끈한 가장 최신 업데이트된 70-595덤프자료를 발송해드립니다.고객님께서 구매하신 덤프의 유효기간을 최대한 연장해드리기 위해 최선을 다하고 있지만 혹시라도 TS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010시험문제가 변경되어 시험에서 불합격 받으시고 덤프비용을 환불받는다면 업데이트 서비스는 자동으로 종료됩니다.

최신 TS 70-595 무료샘플문제:

1. A BizTalk Server 2010 messaging solution processes XML messages. The solution uses a single Business Activity Monitoring (BAM) activity and BAM tracking profile to extract content values from the message. Some of the values are bound to a receive port when the message is received. The other values are bound to a send port when the message is transmitted. At run time you find out that instead of one, two records are created in the BAM database for each processed message. One record contains only the values bound to the receive port. The second record contains only the values bound to the send port. You need to ensure that only one record is created that contains all the values for every message.
What should you do?

A) In the tracking profile, associate a unique value from the message payload to the ActivityID field.
B) Add a relationship to the tracking profile.
C) Add a continuation and continuation ID to the tracking profile.
D) Add a document reference URL to the tracking profile.

2. A BizTalk Server 2010 solution contains multiple applications. One of the applications sends EDI messages to trading partners. The trading partners are defined as parties in the BizTalk Administration console. You need to extract the binding and party information for only the EDI application in an XML file so that you can store that information in source code control. What should you do?

A) Create a binding file for the EDI application and include the party information.
B) Create a binding file that contains the binding for the BizTalk group.
C) Create a binding file for one of the assemblies in the EDI application.
D) Create a Microsoft Windows Installer (MSI) file for the EDI application and include the party information.

3. You are developing a solution for BizTalk Server 2010. You deploy the solution to the runtime environment. The solution includes one orchestration with a direct bound send port that sends a message to the BizTalk MessageBox database for routing to a folder. After starting the BizTalk application for testing, you notice that the following error is logged in the servers event log: The published message could not be routed because no subscribers were found. This error occurs if the subscribing orchestration or send port has not been enlisted, or if some of the message properties necessary for subscription evaluation have not been promoted. Please use the BizTalk Administration console to troubleshoot this failure. You need to resolve the error without changing the code in the orchestration and without redeploying the solution.
What should you do?

A) Add a dynamic send port.
B) Add a send port that has a filter that matches the message type.
C) Add a send port that uses the XmlTransmit pipeline.
D) Add a receive port that uses the XmlReceive pipeline.

4. You are developing a BizTalk Server 2010 orchestration that routes shipping cargo. The orchestrations Transaction Type property has been set to Long Running. Part of the orchestration contains a block of logic for cargo routing. The routing logic is self-contained and makes no external calls that would affect the orchestrations state. You need to ensure that if an exception is thrown, no action taken during the execution of the routing logic block is committed. What should you do?

A) Add a Scope shape to the orchestration and set its Transaction Type property to None. Add a Group shape and add the block of routing logic to it. Place the Group shape in the Scope shape.
B) Add a Scope shape to the orchestration and set its Transaction Type property to Long Running. Add the block of routing logic to the Scope shape.
C) Add a Scope shape to the orchestration and set its Transaction Type property to None. Add the block of routing logic to the Scope shape.
D) Add a Scope shape to the orchestration and set its Transaction Type property to Atomic. Add the block of routing logic to the Scope shape.

5. A BizTalk Server 2010 solution receives invoices in XML format. The solution receives only two types of files: XML files that contain only a single invoice.
The filename of these files starts with the letter S.XML files that contain multiple invoices. The filename of these files starts with the letter M.
You create a receive port with two FILE receive locations. Both receive locations point to the same folder on the file system but each receive location has a different file mask. You configure each receive location to pick up one type of invoice XML. You need to ensure that the single-invoice XML files are processed as soon as possible, and the multiple-invoice XML files are only processed outside of office hours. What should you do?

A) In the receive port, delete one of the receive locations. Configure the other receive location to pick up both types of files. Set the service window to reflect the outside office hour time range.
B) Set the service window of the receive location that picks up the multiple-invoice XML files to reflect the outside office hour time range. Enable both receive locations.
C) Set the schedule start date and stop date of the receive location that picks up the multiple-invoice XML files to reflect the outside office hour time range.
D) Set the service window of the receive location that picks up the multiple-invoice XML files to reflect the outside office hour time range. Make sure this receive location is disabled.

질문과 대답: