최신 MTCNA 무료덤프 - MikroTik Certified Network Associate
Which command is used to determine if an IP access list is enabled on a particular interface?
정답: A
설명: (DumpTOP 회원만 볼 수 있음)
Which of the following commands will allow you to set your Telnet password on a Cisco router?
정답: A
설명: (DumpTOP 회원만 볼 수 있음)
What layer in the TCP/IP stack is equivalent to the Transport layer of the OSI model?
정답: B
설명: (DumpTOP 회원만 볼 수 있음)
What letters appear next to a route, which is automatically created by RouterOS when user adds a valid address to an active interface?
정답: B
설명: (DumpTOP 회원만 볼 수 있음)
What is the address range of a Class B network address in binary?
정답: D
설명: (DumpTOP 회원만 볼 수 있음)
Router A and B are both running as PPPoE servers on different broadcast domains of your network. It is possible to set Router A to use "/ppp secret" accounts from Router B to authenticate PPPoE customers.
정답: B
설명: (DumpTOP 회원만 볼 수 있음)
For a Simple Queue to apply bandwidth restrictions on a bridged interface, the following must be done:
정답: A
설명: (DumpTOP 회원만 볼 수 있음)
You have a router with configuration
* Public IP: 202.168.125.45/24
* Default gateway: 202.168.125.1
* DNS server: 248.115.148.136, 248.115.148.137
* Local IP: 192.168.2.1/24
Mark the correct configuration on client PC to access the Internet:
* Public IP: 202.168.125.45/24
* Default gateway: 202.168.125.1
* DNS server: 248.115.148.136, 248.115.148.137
* Local IP: 192.168.2.1/24
Mark the correct configuration on client PC to access the Internet:
정답: B
설명: (DumpTOP 회원만 볼 수 있음)
What are the two main types of access control lists (ACLs)?
* Standard
* IEEE
* Extended
* Specialized
* Standard
* IEEE
* Extended
* Specialized
정답: B
설명: (DumpTOP 회원만 볼 수 있음)
Which of the following describe the DHCP Discover message?
* It uses FF:FF:FF:FF:FF:FF as a layer 2 broadcast.
* It uses UDP as the Transport layer protocol.
* It uses TCP as the Transport layer protocol.
* It does not use a layer 2 destination address.
* It uses FF:FF:FF:FF:FF:FF as a layer 2 broadcast.
* It uses UDP as the Transport layer protocol.
* It uses TCP as the Transport layer protocol.
* It does not use a layer 2 destination address.
정답: B
설명: (DumpTOP 회원만 볼 수 있음)
Action=redirect applies to
정답: D
설명: (DumpTOP 회원만 볼 수 있음)
Which firewall chain should you use to filter SSH access to the router itself?
정답: C
설명: (DumpTOP 회원만 볼 수 있음)
For static routing functionality, additionally to the RouterOS 'system' package, you will also need the following software package:
정답: B
설명: (DumpTOP 회원만 볼 수 있음)
If arp=reply-only is configured on an interface, what will this interface do?
정답: D
설명: (DumpTOP 회원만 볼 수 있음)