최신 LEED-AP-ID-C 무료덤프 - USGBC LEED AP Interior Design + Construction (LEED AP ID+C) V4

문제1

A Client is fitting out a building with area 20,500 ft2 (1 904.5 m2) and wishes to pursue the Energy and Atmosphere Credit, Enhanced Commissioning. Who may be appointed as the Commissioning Authority (CxA) for the project?

A. An employee or subcontractor of the general contractor or construction manager and a member of the construction team

B. A subcontractor of the general contractor or construction manager but not a member of the construction team

C. An employee of the architecture or engineering firm but not a member of the design team

D. A sub-consultant to the architecture or engineering firm but not a member of the design team

정답: D

설명: (DumpTOP 회원만 볼 수 있음)

문제2

Which of the following should a project team take into consideration during the discovery phase of site selection to earn Integrative Process Credit?

A. Thermal comfort ranges, plug and process load needs

B. Transportation, building features, lighting levels and building envelope attributes

C. Occupant's well-being, building site attributes, transportation and building features

D. Programmatic and operational parameters, and building schedule

정답: C

설명: (DumpTOP 회원만 볼 수 있음)

문제3

What must a project team inventory to determine if a project has enough reused surfaces to document Materials and Resources Credit, Interior Life-Cycle Impact Reduction, Option 1. Interior Reuse?

A. Plumbing fixtures

B. Existing building conditions

C. Salvaged furniture

D. Demolition waste

정답: B

설명: (DumpTOP 회원만 볼 수 있음)

문제4

Which of the following statements is correct when defining the project boundary?

A. The LEED project boundary cannot include more than one building

B. The gross floor area of the LEED project should be no less than 1,000 ft2 (93 m2)

C. Contiguous land that is associated with the project that is altered as a result of construction must be included

D. The project boundary must be defined by the limit of construction

정답: C

설명: (DumpTOP 회원만 볼 수 있음)

문제5

Design is underway for a new tenant suite with 4,000 ft2 (371.6 m2) of net occupiable area. The project build-out will include all new HVAC systems. Operable windows are installed as follows:
A total 75 ft2 (7.0 m2) located within 15 ft. (4.6 m) of all spaces
. A total 50 ft2 (4.6 m2) located within 25 ft. (7.6 m) of all spaces
Which design and documentation strategies must be used to demonstrate compliance with Indoor Environmental Quality Prerequisite, Minimum Indoor Air Quality Performance?

A. Tabulate the total area of operable windows to indicate compliance. No mechanical outside air systems required for space HVAC design

B. Provide MERV 13 (F7) filters on the new HVAC system air handling units. No mechanical outside air systems required for space HVAC design

C. Install 25 ft2 (2.3 m2) of new operable windows within 25 ft. (7.6 m) of all spaces and tabulate the total area of operable windows to indicate compliance

D. Provide new mechanical outside air systems in compliance with ASHRAE 62.1-2010 and document compliance by tabulating rates in compliance with the standard

정답: D

설명: (DumpTOP 회원만 볼 수 있음)

문제6

A project consists of both retail and office space. When deciding which LEED Interior Design and Construction rating system to use, the LEED AP should follow which of the following rules?

A. If a rating system is appropriate for less than 50% of the gross area of the LEED project space, then the rating system should not be used

B. If a rating system is appropriate for 40% to 60% of the gross floor area, the project team must independently assess their situation and decide which rating system is most applicable

C. If a rating system is appropriate for more than 50% of the gross floor area of LEED project space, then that rating system should be used

D. If a rating system is appropriate for 50% to 60% of the gross floor area, the project team must independently assess their situation and decide which rating system is most applicable

정답: C

설명: (DumpTOP 회원만 볼 수 있음)

문제7

The WaterSense label or local equivalent requirement in Water Efficiency Prerequisite, Indoor Water Use Reduction ensures that eligible newly installed plumbing fixtures will

A. comply with all international plumbing system requirements

B. be both water efficient and high performing

C. be advertised as LEED compliant

D. comply with mandatory federal government regulations

정답: B

설명: (DumpTOP 회원만 볼 수 있음)

문제8

During value engineering a project team is looking to see if they can reduce the number of thermal comfort controls. The project's LEED AP notices there are thermostats in the public restroom and says they can be eliminated because public restrooms are considered

A. shared multioccupant space

B. nonregularly occupied space

C. unoccupied space

D. densely occupied space

정답: B

설명: (DumpTOP 회원만 볼 수 있음)

문제9

A tenant is targeting LEED Platinum certification and has hired a LEED AP Interior Design and Construction consultant to help identify and use opportunities to achieve synergies across disciplines and building systems.
Which of the following analyses are required to be completed in the Integrated Process Worksheet to achieve an additional point?

A. Energy-Related Systems

B. Water-Related Systems

C. Waste Management Systems

D. Indoor Air Quality Systems

정답: A

설명: (DumpTOP 회원만 볼 수 있음)

문제10

To determine the area of interior nonstructural elements, the LEED AP will include which one of the following in the calculation for Materials and Resources Credit, Interiors Life Cycle Impact Reduction, Option
1. Interior Reuse?

A. The interior side of exterior windows and doors

B. Hazardous materials that are remediated as part of the project

C. Up to three layers of a floor assembly

D. Items that are demolished and not replaced

정답: D

설명: (DumpTOP 회원만 볼 수 있음)

최신 LEED-AP-ID-C 무료덤프 - USGBC LEED AP Interior Design + Construction (LEED AP ID+C) V4

우리와 연락하기

유용한 링크

최신 업데이트