최신 HQT-4180 무료덤프 - Hitachi Vantara Qualified Professional

문제1

A customer wants to upgrade their VSP E790 with a SAS Expansion feature. What are three requirements? (Choose three.)

A. In Shared Memory, the Extension1 has to be enabled.

B. The SAS Expansion license has to be installed.

C. Slots B of both controllers must be available for DKB installation.

D. Two additional Disk Boards (DKBs) have to be installed.

E. Drive Boxes (DBs) with SAS interface have to be added.

정답: C,D,E

설명: (DumpTOP 회원만 볼 수 있음)

문제2

A customer wants to change a production RAID group from RAID 5 (7D+1P) to RAID 6 (6D+2P) on a VSP G600 during normal operations. They have just unmapped the LUNs from the channel ports.
What needs to be performed next?

A. The RAID level must be changed in Storage Navigator.

B. Parity groups must be deleted.

C. The RAID 5 group must be put into DRU mode in Storage Navigator.

D. The RAID level in the SVP Maintenance window must be changed.

정답: B

문제3

A customer wants to upgrade a VSP E1090 to 1TB RAM capacity.
What is the valid Cache Flash Memory (CFM) configuration?

A. two BM65 per system

B. one BM70 per controller

C. two BM65 per controller

D. two BM70 per controller

정답: D

문제4

Which two reconfiguration activities are performed without interrupting host access on a VSP Gx00 system? (Choose two.)

A. adding a DB60 drive tray

B. upgrading from G200 to G800

C. adding a DKB

D. upgrading from G200 to G600

정답: A,C

문제5

Which tool must be used to configure System Option Modes (SOMs)?

A. HSAe

B. Webconsole

C. MPC software

D. Hitachi Ops Center

정답: C

문제6

A drive in a 3D + 1P RAID group fails in a VSP G700 and there is no spare drive available. Which two actions are automatically performed by the system? (Choose two.)

A. Dynamic Sparing is started.

B. The RAID group is placed in Correction Access.

C. The Correction Copy process starts.

D. An alert is generated.

정답: B,D

문제7

When is the "New Installation" procedure for VSP midrange storage systems typically used?

A. When expanding the storage capacity of the systems

B. When troubleshooting performance issues in the systems

C. When replacing an existing storage system with a new one

D. When upgrading the firmware of the storage systems

정답: C

문제8

A failed SSD on a VSP One B24 has to be replaced. The drive is currently in "block" status.
In this scenario, which two statements are correct? (Choose two.)

A. First, use VSP One Block Administrator to disable Dynamic Drive Protection (DDP)

B. The Maintenance Utility must be used to prevent any access to the drive

C. This should be done by an Hitachi service representative or an authorized partner

D. Use the Maintenance Utility to complete the alerts after the replacement

정답: C,D

최신 HQT-4180 무료덤프 - Hitachi Vantara Qualified Professional - VSP Midrange Family Installation

우리와 연락하기

유용한 링크

최신 업데이트