최신 72301X 무료덤프 - Avaya Aura® Communication Applications Support Certified

문제1

After you finish the Avaya Breeze TM installation you notice that the host name is incorrect.
How can you change the hostname in Avaya Breeze TM?

A. Using SSH client login to the SMGR server and run the command CEnetSetup

B. Using System Manager (SMGR), navigate to Elements > Routing > SIP Entity

C. Using SSH client login to the Breeze server and run the command CEnetSetup

D. Using System Manager (SMGR), navigate to Breeze > Server Administration

정답: C

문제2

You have collected application logs for the SBC device on Avaya Session Border Controller for Enterprise (ASBCE) HA.
What are two ways to access and view the collected application logs (e.g., SSYNDI)? (Choose two.)

A. Connect to the EMS CLI, enter cd /archive/log/ipcs/ss/logfiles/elog/SSYNDI, and use the cat command to view the log.

B. Connect to the EMS web interface, navigate to Monitoring & Logging > Log Archive, and download the logs from the Log Archive tab.

C. Connect to the EMS web interface and navigate to Logs > System Logs in the top menu.

D. Connect to the active SBC device's CLI, enter cd /archive/log/ipcs/ss/logfiles/elog/SSYNDI, and open the debug file to view.

E. Connect to the EMS web interface, switch to the SBC Device menu, navigate to Monitoring & Logging > Log Collection > Log Archive, and download the logs from the Log Archive tab.

정답: D,E

문제3

You are troubleshooting a falling Call Park and Page call and suspect a REST signaling issue between Avaya Breeze server and Avaya Aura Media Server (AAMS).
Which log would help in finding the cause of this problem?

A. rest.log (/var/log/Avaya/sm/rest.log)

B. asm.log (/var/log/Avaya/sm/asm.log)

C. breeze.log (/var/log/Avaya/sm/breeze.log)

D. cpnp.log (/var/log/Avaya/sm/cpnp.log)

정답: B

문제4

A customer reports that during the outage of their main data center, few AST (CM-SIP) users are unable to register to the Branch Session Manager (BSM).
How will you check that the correct Survivability Server has been assigned to the affected users?

A. On the Avaya Aura System Manager (SMGR) web interface, navigate to Users > User Management > Manage Users. Verify that in the Avaya Aura Session Manager (SM) Profile, the correct Survivability Server is assigned.

B. On the System Management Interface (SMI) of the Main Avaya Aura Communication Manager (CM), navigate to Administration > Server (Maintenance), and check in the Security > Administrator Accounts.

C. On the Avaya Aura Communication Manager (CM) SAT, run the display user XXXX command, where XXXX is the user's extension. Verify on the first page, that the correct Survivability Server is assigned.

D. On the Avaya Aura System Manager (SMGR) web interface, navigate to Users > User Management > Manage Users. Verify that in the CM Endpoint Profile, the correct Survivability Server is assigned.

정답: A

문제5

Which two methods can be used to determine the status of the Switch/CTI Link between Avaya AuraCommunication Manager (CM) and Avaya AuraApplication Enablement Services (AES)? (Choose two.)

A. Observe the AES Alarm Report.

B. Run the status aesvcs cti-link command on CM.

C. Observe the AES dashboard.

D. Run an ASAI test on AES.

E. Observe the CM dashboard.

정답: B,D

문제6

A technician is trying to access the Avaya Aura Media Server (AAMS) after receiving a troubleshooting ticket. After falling to enter the system using different web browsers, the technician realizes the incorrect URL was used.
Which URL must be used to access the AAMS web page?

A. https://AAMS FQDN or IP address:8443/emlogin

B. http://SMGR FQDN or IP address:8443/aams

C. http://<AAMS FQDN or IP address>:443/admin

D. http://<AAMS FQDN or IP address>/em

정답: A

문제7

After upgrading Avaya AuraApplication Enablement Services (AES), the customer's CTI application does not seem to be working.
Which two methods can be used to verify AES system status? (Choose two.)

A. Access the AES command line, and run the status aesvcs cti-link command.

B. Access the TSAPI web interface to monitor AES.

C. Access Communication Manager (SAT), and run the statapp command to view AES services status.

D. Access the AES web console, and view the services status in the AES menu.

E. Using Communication Manager's System Administration Terminal (SAT), run the status aesvcs ctilink command to see the service state.

정답: D,E

문제8

Refer to the exhibit. In the Cluster Administration screen of a PresenceServices cluster, when you try to change the cluster state to Accept New Service, you receive the error:
Servers that are not in License Restricted mode assigned to the cluster are below the Minimum number of required servers.
You check that a server has been administered under Engagement Development Platform > Server Administration which shows green check under License Mode, and a System State of Denying.

Which action needs to be taken to solve this problem?

A. Edit the Cluster, access the Servers tab, and assign the server to the cluster; then set the cluster to Accept New Service.

B. Obtain and install an Avaya BreezeTM license on webLM with more instances of Avaya BreezeTM nodes.

C. Under Engagement Development Platform > Server Administration, select the server and change the System State to Accept New Service, then return to the Cluster Administration screen and set the cluster to Accept New Service.

D. Edit the cluster to change the cluster profile from Core Platform to General Purpose.

정답: C

문제9

Which method can be used to verify that TSAPI services and the CTI user have been administered correctly in Application Enablement Services (AES)?

A. Initiate the TSAPI test call for TSAPI Monitoring > Tests in the TSAPI web interface.

B. Initiate the TSAPI test call from Utilities > Diagnostics > AE Service > TSAPI Test in the AES web interface.

C. Initiate the TSAPI test call by logging into the two SIP endpoints using configured CTI users' credentials.

D. Initiate the TSAPI test call by entering test tsapi link from Elements > Communication Manager > Element Cut-Through in the System Manager web interface.

정답: B

문제10

Right after an Avaya Breeze TM installation, the customer called in stating WebRTC calls are not working.
Where can the administrator go to verify that the Avaya Breeze TM server was configured to Accept Service?

A. Avaya AuraSystem Manager web GUI, and navigate to Breeze Dashboard.

B. Avaya AuraSystem Manager command line, run the status service command.

C. Avaya Breeze TM web GUI, and navigate to Avaya Breeze TM Dashboard.

D. Avaya Breeze TM command line, and run the status service command.

정답: A

최신 72301X 무료덤프 - Avaya Aura® Communication Applications Support Certified

우리와 연락하기

유용한 링크

최신 업데이트