최신 70-743 무료덤프 - Microsoft Upgrading Your Skills to MCSA: Windows Server 2016
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Refer to exhibit:
Server1 has two virtual machines named VM1 and VM that run Windows Server 2016. VM1 connects to Private VM2 has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM1 to Internal1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on Server1. You configure VM1 to use VM2 as the default gateway.
Does this meet the goal?
Refer to exhibit:
Server1 has two virtual machines named VM1 and VM that run Windows Server 2016. VM1 connects to Private VM2 has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM1 to Internal1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on Server1. You configure VM1 to use VM2 as the default gateway.
Does this meet the goal?
정답: B
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1.
You need to provide VM1 with direct access to a graphics processing unit (GPU) on Server1.
What should you do first?
You need to provide VM1 with direct access to a graphics processing unit (GPU) on Server1.
What should you do first?
정답: B
설명: (DumpTOP 회원만 볼 수 있음)
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com. The domain contains two domain controllers named DO aodDC2.
DC1 holds the RID master operations role.
DO fails and cannot be repaired.
You need to move the RIO role to DC2.
Solution: On DC2, you open Active Directory Users and Computers, click Operations Masters.., verify that dc2.contoso.com is listed on the RID tab, and click Change.
Does this meet the goal?
After you answer a question in this section, you will NOT be able to return to it. As a result these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com. The domain contains two domain controllers named DO aodDC2.
DC1 holds the RID master operations role.
DO fails and cannot be repaired.
You need to move the RIO role to DC2.
Solution: On DC2, you open Active Directory Users and Computers, click Operations Masters.., verify that dc2.contoso.com is listed on the RID tab, and click Change.
Does this meet the goal?
정답: A
설명: (DumpTOP 회원만 볼 수 있음)
Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016.
Server1 and Server2 are nodes in a Hyper-V cluster named Cluster1. You have a highly available virtual machine named VM1. Server1 is the owner node of VM1. Server3 and Server4 are nodes of a scale-out file server named Cluster2.
The storage on Server1 is configured as shown in the following table.
VM1 is stored in C:\ClusterStorage\Volume1.
You need to move the virtual disk of VM1 to a different location.
What should you do? To answer, select the appropriate options in the answer area.
Server1 and Server2 are nodes in a Hyper-V cluster named Cluster1. You have a highly available virtual machine named VM1. Server1 is the owner node of VM1. Server3 and Server4 are nodes of a scale-out file server named Cluster2.
The storage on Server1 is configured as shown in the following table.
VM1 is stored in C:\ClusterStorage\Volume1.
You need to move the virtual disk of VM1 to a different location.
What should you do? To answer, select the appropriate options in the answer area.
정답:
Explanation
Box 1: Failover Cluster Manager
You can use Failover Cluster Manager to do a Storage Migration to a shared folder.
Box 2: \\Cluster2\Share1
For a highly-available VM, the storage must be accessible by all nodes in the cluster. Therefore, in this scenario, we have to use the file share.
You c
References:
https://blogs.msdn.microsoft.com/clustering/2012/04/26/windows-server-2012-storage-migration-for-cluster-man
Scenario:
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.
You install the Remote Access server role on Server2.
Server2 has the following configured.
*Network address translation (NAT)
*The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2 You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
End of Scenario:
What should you do to meet the DHCP connectivity requirement for Subnet2?
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.
You install the Remote Access server role on Server2.
Server2 has the following configured.
*Network address translation (NAT)
*The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2 You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
End of Scenario:
What should you do to meet the DHCP connectivity requirement for Subnet2?
정답: A
You have Hyper-V virtual machines that run 50 web servers, 10 Microsoft SQL Server servers. 10 file servers, and eight domain controllers.
You need to implement a backup strategy that meets the following requirements:
*Backs up all servers
*Centralizes backup management
*Performs application-level backups
*Provides the ability to perform bare metal recovery
What should you use?
You need to implement a backup strategy that meets the following requirements:
*Backs up all servers
*Centralizes backup management
*Performs application-level backups
*Provides the ability to perform bare metal recovery
What should you use?
정답: C
You are planning the deployment of DNS to a new network.
You have three internal DNS servers configured as shown in the following table.
The conIoso.com zone contains zone delegations for east.contcso.com and wesLcontoso.com. All the DNS servers use root hints. You need to ensure that all the DNS servers can resolve the names of all the internal namespaces and internet hosts. Solution: On Server2 and Server3. you configure a conditional forwarder for contoso.com. Does the meet the goal?
You have three internal DNS servers configured as shown in the following table.
The conIoso.com zone contains zone delegations for east.contcso.com and wesLcontoso.com. All the DNS servers use root hints. You need to ensure that all the DNS servers can resolve the names of all the internal namespaces and internet hosts. Solution: On Server2 and Server3. you configure a conditional forwarder for contoso.com. Does the meet the goal?
정답: A
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 and a member server named Server2.
Server1 has the DNS Server role installed. Server2 has IP Address Management (IPAM) installed. The IPAM server retrieves zones from Server1 as shown in the following table.
The IPAM server has one access policy configured as shown in the exhibit. (Click the Exhibit button.)
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Server1 has the DNS Server role installed. Server2 has IP Address Management (IPAM) installed. The IPAM server retrieves zones from Server1 as shown in the following table.
The IPAM server has one access policy configured as shown in the exhibit. (Click the Exhibit button.)
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
정답:
Explanation
Box 1: Yes
As a member of the IPAM DNS Administrator Role of the ADatum zone, User1 can add DNS records to it.
Box 2: Yes
As a member of the DNS Record Administrator Role of the Fabrikam zone, User1 can add DNS records to it.
Box 3: No
DNS Record Administrators cannot delete zones, only administer DNS records.
References: https://technet.microsoft.com/en-us/library/hh831353(v=ws.11).aspx
You have an Active Directory domain named Contoso.com. The domain contains Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. The Hyper-V hosts are configured to use NVGRE for network virtualization.
You have six virtual machines that are connected to an external switch. The virtual machines are configured as shown.
To which virtual machine or virtual machines can VM1 and VM3 connect? To answer, select the appropriate options in the answer area.
You have six virtual machines that are connected to an external switch. The virtual machines are configured as shown.
To which virtual machine or virtual machines can VM1 and VM3 connect? To answer, select the appropriate options in the answer area.
정답:
Explanation
The GRE keys must match.
To separate the traffic between the two virtualized networks, the GRE headers on the tunneled packets include a GRE Key that provides a unique Virtual Subnet ID for each virtualized network.
References:
https://blogs.technet.microsoft.com/keithmayer/2012/10/08/step-by-step-hyper-v-network-virtualization-31-days
You have several custom deployment images for Windows Server 2016. The images are stored in a WIM file named install.wim.
You need to apply a cumulative update located in C:\Packages to the first image in the WIM file.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
You need to apply a cumulative update located in C:\Packages to the first image in the WIM file.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
정답:
Explanation
References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/servicing-the-image-with-windows-up
https://docs.microsoft.com/en-us/powershell/module/dism/save-windowsimage?view=win10-ps
You have a server named Server1 that runs Windows Server 2016.
You need to configure Server1 as a Web Application Proxy.
Which server role or role service should you install on Server1?
You need to configure Server1 as a Web Application Proxy.
Which server role or role service should you install on Server1?
정답: E
You have a server named Server1 that runs Windows Server 2016. You plan to deploy Internet Information Services (US) in a Windows container. You need to prepare Server1 for the planned deployment. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
정답:
On a DNS server that runs Windows Server 2016, you plan to create two new primary zones named adatum.com and contoso.com. You have the following requirements for the zones:
* Ensure that computers on your network can register records automatically in the adatum.com zone.
* Ensure that records that are stale for two weeks are purged automatically from the contoso.com zone.
What should you configure for each zone? To answer, select the appropriate options in the answer area.
* Ensure that computers on your network can register records automatically in the adatum.com zone.
* Ensure that records that are stale for two weeks are purged automatically from the contoso.com zone.
What should you configure for each zone? To answer, select the appropriate options in the answer area.
정답:
You have a Hyper-V host that runs Windows Server 2016. The host contains a virtual machine named VM1.
VM1 has resource metering enabled.
You need to use resource metering to track the amount of network traffic that VM1 sends to the 10.0.0.0/8 network.
Which cmdlet should you run?
VM1 has resource metering enabled.
You need to use resource metering to track the amount of network traffic that VM1 sends to the 10.0.0.0/8 network.
Which cmdlet should you run?
정답: C
설명: (DumpTOP 회원만 볼 수 있음)
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. All domain controllers run Windows Server 2012 R2.
Contoso.com has the following configuration:
You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration.
You need to configure Active Directory to support the planned deployment.
Solution: You raise the forest (domain) functional level to Windows Server 2012 R2.
Does this meet the goal?
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. All domain controllers run Windows Server 2012 R2.
Contoso.com has the following configuration:
You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration.
You need to configure Active Directory to support the planned deployment.
Solution: You raise the forest (domain) functional level to Windows Server 2012 R2.
Does this meet the goal?
정답: A
설명: (DumpTOP 회원만 볼 수 있음)
You have four Hyper-V hosts named Server1, Server2, Server3, Server4 that run Windows Server 2016. The hosts are nodes in a failover cluster.
A virtual machine named VM1 is running in the failover cluster. The role for VM1 is configured as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the Information presented in the graphic.
A virtual machine named VM1 is running in the failover cluster. The role for VM1 is configured as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the Information presented in the graphic.
정답:
Explanation
References:https://msdn.microsoft.com/en-us/library/aa369665(v=vs.85).aspx
You have a server named Server1 that runs Windows Server 2016.
You need to configure Server1 as a multitenant RAS Gateway.
What should you install on Server1?
You need to configure Server1 as a multitenant RAS Gateway.
What should you install on Server1?
정답: D
설명: (DumpTOP 회원만 볼 수 있음)