최신 6002-1 무료덤프 - Avaya Aura(TM) Communication Manager and CM Messaging (R6.0) Implementation

A. By going to the home page of Dom 0

B. By going to the home page of console domain.

C. By using the internet explorer http://Cdom .lpaddr/vm

D. By going to the homepage of Avaya communication manager.

A. A paring test executed from the servers to the IPSIs and from the IPSIs to the servers returns success for the active IPSI and failure for the standby IPSI.

B. IPSI circuit packs have been installed slots 1 and 2 carrier A and one of the IPSI LEDs is flashing.

C. The enable operation of IPSI Duplication field on the display system-parameter duplication form is set to y.

D. Execution of the test IPserver-interface command for both IPSI circuit packs shows PASS in the result column.

A. System management

B. Evolution server

C. Feature server

D. Signaling server

A. Execute the SAT command status media-gateways, to determine which media gateways are not registered to the main server

B. Execute the Communication Manager command display alarms, to see whether the No Service Timeout Timer (NSTT) has expired

C. Execute the Communication Manager command display alarms, to see whether the Link Loss Delay timer has expired

D. Execute the command status H.248 line from the remote gateway, to determine whether the link to the main server is active

E. Execute the SAT command List media-gateway from the remote survivable server, to determine whether the media gateway is registered with a survivable server

A. A call between a DCP endpoint and H.323 end point can be shuffled.

B. The audio connection type field on the communication manager status station formation can be used to determine whether a call is shuffled.

C. Hairpining does not use media processor resources.

D. Shuffling release media processor resources.

A. From a browser logged into communication Manager, Select administration > server (Maintenance)> server>Process Status. Click on view.

B. From a browser, using the communication manager IP address, successfully log into the communication manager system management.

C. When monitoring the template installation workflow status, verify the message. "Wizard completed successfully" displays.

D. From a browser logged into the system Management console verify cm, bsm, and utility_server and application status is running

A. Utility services

B. CMM 6.0

C. Session manager

D. AES 6.0

E. CM 6.0