최신 4A0-C04 무료덤프 - Nokia NRS II Composite Exam: OSPF version

A. Enable traffic engineering on all routers along the LSP path.

B. Configure a path definition on all routers along the LSP path.

C. Enable CSPF on the head-end router.

D. Enable MPLS and RSVP on all routers along the LSP path.

A. By definition, an area border router must perform route summarization between areas.

B. The term backbone router has the same definition as the term area border router.

C. Area border routers connect the backbone area to other areas in an OSPF network.

D. An OSPF network needs at least one area border router to function.

A. 65200 65100

B. 65250 (65206 65202) 65100

C. (65206 65202)65100

D. 65200 (65206 65202) 65100

A. Static-route next-hop 3.4.5.6 2.3.4.0/24

B. Static route 2.3.4.0 255.255.255.0 next hop 3.4.5.6

C. Static-route 2.3.4.0/24 next-hop 3.4.5.6

D. Static route 2.3.4.0/24 next hop 3.4.5.6

A. "65100"

B. ".+ 65100"

C. ".* 65100.*"

D. "65100.+"

A. They are broadcast or multicast, depending on the physical media.

B. They are multicast to the All Hosts address.

C. They are broadcast to the subnet broadcast address.

D. They are multicast to the All Routers address.

A. The unicast IP address of the interface the update is sent on

B. 224.0.0.5

C. 224.0.0.6

D. The system address of the router.

A. Cut through forwarding

B. Control traffic prioritization

C. Traffic engineering extensions

D. Fast reroute capability

E. Route redistribution

A. config>router>bgp= confederation 65200 members 65202

B. config>router>bgp= confederation 65202 members 65200

C. config>router- confederation 65200 members 65202

D. config>router= confederation 65202 members 65200

A. The options field is set to router alert.

B. The HOP object includes R2's system address.

C. The destination address is R2's ingress interface address.

D. The source address is R1's egress interface address.

A. It provides the ability to establish connection oriented paths over a connectionless IP network.

B. It can use GRE tunnels to transport data from many different protocols over an IP network.

C. It will work over most physical layer protocols.

D. It provides a mechanism to engineer network traffic patterns independently of IP routing tables.

A. Show ospf neighbors

B. Show ospf adjacency

C. Show router ospf adjacency

D. Show router ospf neighbors

A. 5 and 20 seconds

B. 10 and 30 seconds

C. 5 and 15 seconds

D. 10 and 40 seconds

A. The MPLS label value may be carried in an OSPF header.

B. The MPLS label value may be carried in a Frame Relay header.

C. The MPLS label value may be carried in an ATM header.

D. The MPLS label value may be carried in a shim header.

A. Enabling traffic engineering

B. Enabling VPNs

C. Enhancing network resiliency

D. Enabling network security

A. Path-ID is a four-octet identifier pre-pended to the NLRI field of a BGP update.

B. Path-ID is an optional transitive attribute used to advertise multiple paths.

C. Path-ID uniquely identifies each path advertised to a neighbor.

D. A BGP speaker that re-advertises a route must generate its own Path-ID.

A. PE-1 requires a full mesh of RSVP-TE LSPs to all routers in area 1.

B. PE-1 requires T-LDP sessions to both ABR-1 and ABR-2.

C. ABR-1 requires T-LDP sessions to all ABRs in area 0.

D. PE-1 requires fast reroute enabled on all RSVP-TE LSPs.

A. The peer that generated the first Hello message.

B. The peer with the lower transport address.

C. The peer with the lower physical address.

D. The peer with the higher physical address.

E. The peer with the higher transport address.

A. Route-Refresh

B. Update

C. OpenSent

D. Notification

E. Keepalive

A. 255

B. 1

C. 64

D. 32