최신 3V0-12.26 무료덤프 - VMware Advanced VMware Cloud Foundation 9.0 Architect
During the design workshop, the customer stated the following requirement:
* The solution must support secure communication.
Which design decision should be included in the logical design for the workload domain?
* The solution must support secure communication.
Which design decision should be included in the logical design for the workload domain?
정답: D
설명: (DumpTOP 회원만 볼 수 있음)
An architect has been engaged to design a new VMware Cloud Foundation (VCF) deployment for a customer that will provide platform-level high availability across three data centers to support their applications.
The customer has advised that there is high-bandwidth connectivity of 10 Gbps+ between the data centers, with less than 5 ms Round Trip Time (RTT) between each site, supporting a combination of Layer-2 and Layer-3 capabilities.
The customer has provided the following additional requirements:
* A mix of Tier-1 (mission critical), Tier-2 (business critical), and Tier-3 (business operational) applications.
* Tier-1 and Tier-2 applications require a Recovery Point Objective (RPO) of zero .
* Compliance with all data sovereignty regulations.
* Operational complexity must be reduced where possible.
* Maximum Recovery Time Objective (RTO) of 24 hours in the event of a regional failure.
Given this information, which design should be recommended for the customer?
The customer has advised that there is high-bandwidth connectivity of 10 Gbps+ between the data centers, with less than 5 ms Round Trip Time (RTT) between each site, supporting a combination of Layer-2 and Layer-3 capabilities.
The customer has provided the following additional requirements:
* A mix of Tier-1 (mission critical), Tier-2 (business critical), and Tier-3 (business operational) applications.
* Tier-1 and Tier-2 applications require a Recovery Point Objective (RPO) of zero .
* Compliance with all data sovereignty regulations.
* Operational complexity must be reduced where possible.
* Maximum Recovery Time Objective (RTO) of 24 hours in the event of a regional failure.
Given this information, which design should be recommended for the customer?
정답: C
설명: (DumpTOP 회원만 볼 수 있음)
An architect is working with a customer on a transition and transformation program within a data center. They are looking for a VMware Cloud Foundation (VCF) design with the following details:
* The design must leverage a multi-rack architecture .
* vSphere HA fault detection and recovery is a must.
* Resource consumption is not a concern .
Which VMware Cloud Foundation design blueprint would be recommended in this scenario?
* The design must leverage a multi-rack architecture .
* vSphere HA fault detection and recovery is a must.
* Resource consumption is not a concern .
Which VMware Cloud Foundation design blueprint would be recommended in this scenario?
정답: D
설명: (DumpTOP 회원만 볼 수 있음)
An architect is designing a vSphere Kubernetes Service (VKS) solution that provides high availability for VKS Clusters.
The environment contains:
* One Workload Domain
* Three Clusters
* Six ESX hosts in each Cluster
* One vSphere Namespace across three vSphere Zones
The solution must provide cluster-level failure tolerance. In the event that one cluster goes offline, cluster- level failure tolerance must still be in place.
Which VKS Cluster design solution fits this requirement?
The environment contains:
* One Workload Domain
* Three Clusters
* Six ESX hosts in each Cluster
* One vSphere Namespace across three vSphere Zones
The solution must provide cluster-level failure tolerance. In the event that one cluster goes offline, cluster- level failure tolerance must still be in place.
Which VKS Cluster design solution fits this requirement?
정답: A
설명: (DumpTOP 회원만 볼 수 있음)
An enterprise architect is designing the physical networking architecture for a greenfield VMware Cloud Foundation (VCF) deployment in a single data center. The deployment includes a management domain and multiple workload domains, utilizing NSX for software-defined networking with Geneve overlay encapsulation. NSX Edge nodes will handle North/South routing and services.
Requirements:
* Scalable, non-blocking fabric with predictable oversubscription and low latency.
* Support for high-throughput traffic including vSAN, vMotion, and NSX overlay.
* End-to-end jumbo frame support for efficiency.
* No dependency on physical multicast routing or snooping for overlay (BUM) Broadcast, Unknown- unicast, and Multicast replication.
* Redundant connectivity from hosts to the fabric.
Constraints:
* Existing Top-of-rack switches are limited to 25 GbE host-facing ports.
* The physical network does not support multicast.
* Future expansion to multiple racks and higher port speeds (25/100 GbE) is anticipated.
What are the four design decisions that fit the architecture ' s physical design? (Choose four.)
Requirements:
* Scalable, non-blocking fabric with predictable oversubscription and low latency.
* Support for high-throughput traffic including vSAN, vMotion, and NSX overlay.
* End-to-end jumbo frame support for efficiency.
* No dependency on physical multicast routing or snooping for overlay (BUM) Broadcast, Unknown- unicast, and Multicast replication.
* Redundant connectivity from hosts to the fabric.
Constraints:
* Existing Top-of-rack switches are limited to 25 GbE host-facing ports.
* The physical network does not support multicast.
* Future expansion to multiple racks and higher port speeds (25/100 GbE) is anticipated.
What are the four design decisions that fit the architecture ' s physical design? (Choose four.)
정답: A,B,D,G
설명: (DumpTOP 회원만 볼 수 있음)
An architect is designing VMware Cloud Foundation (VCF) across two availability zones (AZ) with planned expansion to three zones. The network team requires direct BGP routing from core network switches to the virtual network infrastructure. They need predictable routing behavior and want to eliminate extra hops through edge nodes where possible. Management domain and workload domains must have independent northbound connectivity.
How should the architect design the Provider Gateway connectivity, and what network topology should be implemented?
How should the architect design the Provider Gateway connectivity, and what network topology should be implemented?
정답: A
설명: (DumpTOP 회원만 볼 수 있음)
An architect is designing for a VMware Cloud Foundation (VCF) Instance. The following requirements and constraints were documented.
* The management domain cluster utilizes vSAN stretched as the principal storage.
* Company policy states that compute and storage capacity utilization must not exceed 85% at all times.
Which three statements should the architect consider when designing the solution to satisfy the requirements?
(Choose three.)
* The management domain cluster utilizes vSAN stretched as the principal storage.
* Company policy states that compute and storage capacity utilization must not exceed 85% at all times.
Which three statements should the architect consider when designing the solution to satisfy the requirements?
(Choose three.)
정답: A,D,F
설명: (DumpTOP 회원만 볼 수 있음)