최신 3601 무료덤프 - Avaya Virtual Services Platform 9000 Maintenance and Troubleshooting

문제1

How can configuration redundancy be achieved on a VSP 9000?

A. Define the secondary and tertiary backups to the primary configuration file path.

B. Define the primary and backup configuration file paths.

C. Use two Compact Flash (CF) cards, one mirroring the other.

D. Partition the system flash memory to provide two copies.

정답: B

문제2

There is indication of traffic loss in the VSP 9000.
What is the first thing a technician should do to determine the cause of this problem?

A. Check the traffic counters.

B. Ensure that sufficient ports are active.

C. Check the projected traffic levels.

D. Ensure all the cards are up.

정답: A

문제3

How does a technician access Flight Recorder functionality?

A. menu item selection

B. ACLI

C. through the traffic surveillance utility

D. User-mode CLI

정답: B

문제4

Whit must be loaded or created on the VSP 9000 to use SNMPv3 with Data Encryption Standard (DES) or Advanced Encryption Algorithm (AES) to access the switch?

A. the encryption module

B. the agentconformancemodule

C. a dedicated Avaya Management Information Base (MIB) view table

D. adedicatedView-based Access Control Module (VACM) table

정답: A

문제5

A technician is configuring Open Shortest Path First (OSPF) on a VSP 9000, and is using this formula shown in the exhibit to determine the OSPF Link State Advertisement (LSA) limits.
What does LSA_CNT in the formula represent?

A. the number of CNTs for all areas

B. the number of LSAs for all areas

C. the number of LSAs for a given area

D. the number of adjacencies for each area

정답: C

문제6

How does the VSP 9000 avoid loops related to MAC addresses?

A. If the chassis detectsthe SLPP packet source address is theIST MAC, it shuts down the port receiving that packet.

B. If the chassis detects itsown source MAC address in an SLPP packet, it shuts down the port receiving that packet.

C. The destination MAC address is always on the secondary switch.

D. It uses source learning for SimpleLoop Prevention Protocol (SLPP) Source MAC.

정답: B

문제7

A technology is investigating traffic loss, and has seen that traffic counters are not increasing on the primary VSP 9000. What can be done to ensure the correct ports are in MultiLink Trunking (MLT)?

A. Match the MLT configuration of the primary VSP 9000, to that of the secondary switch.

B. Ensure the physical layer matches the configuration.

C. Unlock and then relock all MLT ports.

D. Resetthe MLT ports to the default.

정답: B

최신 3601 무료덤프 - Avaya Virtual Services Platform 9000 Maintenance and Troubleshooting

우리와 연락하기

유용한 링크

최신 업데이트