최신 LEED-AP-BD-C 무료덤프 - USGBC LEED AP Building Design + Construction (LEED AP BD+C)

문제1

Which of the following credits can be awarded an Innovation point for Exemplary Performance?

A. Indoor Environmental Quality Credit, Acoustic Performance

B. Indoor Environmental Quality Credit, Daylight

C. Indoor Environmental Quality Credit, Low-Emitting Materials

D. Indoor Environmental Quality Credit, Minimum Indoor Air Quality Performance

정답: C

설명: (DumpTOP 회원만 볼 수 있음)

문제2

When the LEED AP is applying the Integrative Process to a Building Design and Construction project, when should the Owner's Project Requirements (OPR) be created and updated?

A. After the design is completed and are generally not updated

B. Once the project design is completed and edited throughout the project

C. During predesign and are edited throughout the project

D. Prior to beginning design and are generally not updated

정답: C

설명: (DumpTOP 회원만 볼 수 있음)

문제3

A project's installed water fixtures do not exceed WaterSense maximum levels. Which compliance path should the LEED AP select under Water Efficiency Prerequisite, Indoor Water Use Reduction, and what type of documentation is required to demonstrate compliance with this path?

A. Compliance Path 1: Prescriptive Achievement; product cutsheets

B. Compliance Path 1: Prescriptive Achievement; indoor water use calculations

C. Compliance Path 2: Usage-Based Calculation; appliance water calculations

D. Compliance Path 2: Usage-Based Calculation; prescriptive compliance confirmation

정답: A

설명: (DumpTOP 회원만 볼 수 있음)

문제4

Which of the following characteristics are a requirement of a compliant water meter?

A. Must transmit data to a remote location

B. Must be digital

C. Must be capable of storing data for 36 months

D. Must be permanently installed

정답: D

설명: (DumpTOP 회원만 볼 수 있음)

문제5

What LEED Building Design and Construction project type should exclude weekend transit service from the transit service level calculations for Location and Transportation Credit, Access to Quality Transit, if the project occupants do not commute to the building during weekends?

A. Hospitality

B. Schools

C. Data centers

D. Warehouses and distribution centers

정답: C

설명: (DumpTOP 회원만 볼 수 있음)

문제6

A project has total waste of 20 tons (18.1 tonnes) that includes the following:
8 tons (7.3 tonnes) of recycled demolition steel and concrete
2 tons (1.8 tonnes) of trees cleared from the site
. 3 tons (2.7 tonnes) of commingled scrap with 40% diverted
. 6 tons (5.4 tonnes) of used furniture donated to a non-profit organization
1 ton (0.9 tonnes) of removed carpet and ceiling tiles sent back to the manufacturer What is the percentage of diverted waste for Materials and Resources Credit, Construction and Demolition Waste Management?

A. 60%

B. 90%

C. 100%

D. 75%

정답: D

설명: (DumpTOP 회원만 볼 수 있음)

문제7

What is the minimum number of members of the integrated project team for the Integrative Process Prerequisite, Integrative Project Planning and Design?

A. Six

B. Four

C. Two

D. One

정답: B

설명: (DumpTOP 회원만 볼 수 있음)

문제8

A tenant of a new office building will require 100 workstations per floor. Each floor will have two bathroom facilities and one conference room. How many lighting control devices with at least three lighting levels per floor are required to comply with Indoor Environmental Quality Credit, Interior Lighting, Option 1. Lighting Control?

A. 93 lighting control devices

B. 100 lighting control devices

C. 103 lighting control devices

D. 91 lighting control devices

정답: A

설명: (DumpTOP 회원만 볼 수 있음)

문제9

A design team is working on a new building project and is employing an integrated, whole-building approach.
The architects want to increase the size of a glazed opening on the south facing wall. Which team members are first affected by this change?

A. Facility managers

B. Landscape architects

C. Civil engineers

D. Mechanical engineers

정답: D

설명: (DumpTOP 회원만 볼 수 있음)

문제10

How much value would these two doors contribute toward Material and Resources Credit, Building Product Disclosure and Optimization - Sourcing of Raw Materials, Option 2. Leadership Extraction Practices?

A. $125.00

B. $50.00

C. $100.00

D. $150.00

정답: C

설명: (DumpTOP 회원만 볼 수 있음)

문제11

At the time of registering a project in LEED Online, Regional Priority credits are determined based upon the project's

A. longitude and latitude

B. environmental zone

C. ASHRAE 90.1 - 2010 climate zone

D. Environmental Protection Agency Phase I Assessment

정답: A

설명: (DumpTOP 회원만 볼 수 있음)

문제12

A project in a cold climate does not want a highly reflective roof because they want the heat absorption. How can this project comply with Sustainable Sites Credit, Heat Island Reduction?

A. The credit is not feasible for this project

B. The credit can only be achieved by using an alternative compliance path

C. The credit may be achieved by using nonroof measures only

D. The credit is applicable for projects that document this special condition

정답: C

설명: (DumpTOP 회원만 볼 수 있음)

문제13

U.S. Green Building Council (USGBC)'s vision for using LEED internationally includes

A. creating multiple LEED rating systems for different countries

B. providing opportunities for alternative compliance paths that meet the unique needs of a particular region

C. modifying U.S. reference standards, such as ASHRAE 90.1, to be more appropriate for regions outside the U.S.

D. allowing more stringent credit requirements for countries outside of the U.S. so that all projects can achieve LEED

정답: B

설명: (DumpTOP 회원만 볼 수 있음)

문제14

A project attempting to meet the preferred parking requirements for Location and Transportation Credit, Green Vehicles may provide what incentive to meet the requirements and highlight the project sustainable vehicle strategy?

A. Three years of free parking for green vehicles

B. An annual maintenance voucher for at least 5% of occupants driving green vehicles

C. Preferred parking decals for 5% of occupants utilizing carpool vehicles

D. A permanent discounted parking rate of at least 20% for all green vehicles

정답: D

설명: (DumpTOP 회원만 볼 수 있음)

문제15

Which of the following statements is correct when defining the project boundary?

A. The LEED project boundary cannot include more than one building

B. The gross floor area of the LEED project should be no less than 1% of the gross land area within the LEED project boundary

C. The LEED project boundary cannot include non-contiguous land

D. The land associated with the project supports typical operation

정답: D

설명: (DumpTOP 회원만 볼 수 있음)

문제16

The use of lead, mercury, copper and cadmium should be limited because they all

A. interfere with the magnetic instruments in a medical building

B. reduce the life cycle assessment of a building

C. take an unreasonable amount of energy to recycle

D. are persistent bioaccumulative toxins

정답: D

설명: (DumpTOP 회원만 볼 수 있음)

문제17

Which of the following is required to earn Energy and Atmosphere Credit, Renewable Energy Production if using a Solar Photovoltaic System?

A. Passive solar strategies

B. Daylighting strategies

C. Produced electricity consumed on-site

D. Carbon offsets

정답: C

설명: (DumpTOP 회원만 볼 수 있음)

문제18

Which of the following buildings meets the Minimum Program Requirements for LEED certification?

A. A 20,000 ft2 (1 859 m2) Transit Parking Garage located on a previously developed five-acre site

B. A 1,500 ft2 (139 m2) Tourism Center located on a previously undeveloped one-acre site

C. A 5,000 ft2 (465 m2) Science Education center on an above-water pier that is being built specifically for the Education center

D. A 2,500 ft2 (232 m2) mobile Health Clinic located on a previously constructed above-water dock

정답: C

설명: (DumpTOP 회원만 볼 수 있음)

문제19

Which of the following groups of documents is most likely to support both Indoor Environmental Quality Credit, Thermal Comfort, and Indoor Environmental Quality Credit, Interior Lighting, Option 1. Lighting Control?

A. Photometric plans, mechanical schedules, lamp specifications

B. Surveys of occupants, photometric plans, mechanical schedules

C. Lighting plans, surveys of occupants, sequence of operations

D. Architectural floor plans, mechanical plans, lighting plans

정답: C

설명: (DumpTOP 회원만 볼 수 있음)

최신 LEED-AP-BD-C 무료덤프 - USGBC LEED AP Building Design + Construction (LEED AP BD+C)

우리와 연락하기

유용한 링크

최신 업데이트