최신 301 무료덤프 - F5 LTM Specialist

문제1

A BIG-IP has two SNATs, a pool of DNS servers and a virtual server configured to load-balance UDP traffic to the DNS servers. One SNAT's address is 64.100.130.10; this SNAT is defined for all addresses.
The second SNAT's address is 64.100.130.20; this SNAT is
defined for three specific addresses, 172.16.3.54, 172.16.3.55, and 172.16.3.56. The virtual server's destination is
64.100.130.30:53.
The SNATs and virtual server have default VLAN associations. If a client with IP address 172.16.3.55 initiates a request to the virtual server, what is the source IP address of the packet as it reaches the chosen DNS server?

A. 64.100.130.10

B. 64.100.130.30

C. 64.100.130.20

D. 172.16.3.55

정답: C

문제2

What occurs when a load?command is issued?What occurs when a ? load?command is issued?

A. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {172.16.20.1:80}

B. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {172.16.20.1:80{} }

C. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {172.16.20.1:80{priority- group 2}}

D. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {170.16.20.1:80}

정답: D

문제3

Which statement describes advanced shell access correctly?
Which statement describes advanced shell access correctly?

A. The context determines which events are available for iRule processing.

B. The context determines the values of commands that vary between client and server.

C. The context has no impact on events.

D. The context determines which pools are available for load balancing.

정답: B

문제4

Which is a potential result when a trunk is configured on a BIG-IP?

A. VLAN fail-safe is not available for any VLAN associated with any trunks.

B. Packets flowing to the VLAN could arrive on any of the interfaces in the trunk

C. Since any VLANs associated with the trunk are necessarily associated with multiple interfaces, the VLAN using the must use tagged packets.

D. No additional trunks can be configuration since each BIG-IP is limited to one trunk

정답: B

문제5

QUESTION NO: 34. Click the Exhibit Button an LTM has the 3 virtual servers, a SNAT defined, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults. VirtualServer 1 Destination: 10.10.1.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network SNAT Automap enabled VirtualServer2 Destination: 10.10.1.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer 3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNATI Source IP: All Addresses SNAT Address: SNAT Pool with 2 members -
172.16.20.50 and
192.168.10.50 Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1 A connection attempt is made with a source IP and port of 10.20.100.50:80 and a destination IP and port of 10.10.2.10:80. When the request is processed, what will be the source and destination IP addresses?

A. Source IP: 10.10.2.1; Destination IP: 10.10.2.10

B. The request will be dropped.

C. Source IP: Either 172.16.20.50 or 192.168.10.50; Destination IP: 10.10.2010

D. Source IP: 10.20.100.50; Destination IP: 10.10.2.10

정답: C

최신 301 무료덤프 - F5 LTM Specialist

우리와 연락하기

유용한 링크

최신 업데이트